DEL Tank and Filtration System specializes in the Rental, Sales, and Manufacturing of Dewatering, Solids Control and Material Handling Equipment.  Not only has DEL achieved remarkable growth since 1979 but they have made a name for themselves as one of the world's largest suppliers of complete turnkey systems for dewatering, solids separation, and various other types of material handling projects.  Their diversified equipment line makes it possible for clients to "one-stop-shop" eliminating the need for multiple vendors - and more importantly, conserving valuable time and capital.
 
                DEL can provide you with their Patented TOTAL CLEAN SYSTEM, Patented Multi-Screw V-Tank System, Filter Presses, Mix Tanks, DEL Mixers, The DELineator Shaker, and Custom Fabrication.
 
                The following video is a demonstration of how well the Patented Total Clean System works.  This video will demonstrate rapid dewatering of Sand, Silt, Coal, and Carbon with flow rates ranging from 800 GPM to 3000 GPM.  Even at these flow rates this system will give you  up to 85%  dry solids depending on the type of material..
TIME 1 MINUTE,           
 
Frame 2 - Total Clean Animation
                Have him Voice Over explaining Total Clean
               
 The Total Clean is unique in its flow process from any other system .  The TOTAL CLEAN SYSTEM incorporates a v-shaped tank, a tilted plate baffle system, and a shaftless screw to create a clarifier.  Instead of attempting to suspend the solids with the use of jets and agitators the TOTAL CLEAN lets nature takes its course and  encourages  the solids to settle to the bottom of the v-tank portion of the unit.  The settling is enhanced by the tilted plate baffle system, which the slurry must flow through as it passes through the v-tank.  The shaftless screw steadily moves the settled solids to the suction of the hydrocyclone feed pump.  Varying the speed of the shaftless screw with VFD regulates the concentration of the slurry that is then pumped to the hydrocyclones.  The heavy material and silts are removed by the hydrocyclones and then dewatered over high frequency linear shaker.  The hydrocyclone/shaker units and pumps are sized appropriately so that the hydrocyclone feed rate is 3 to 4 times the flow rate through the system.  This redundancy  maximizes  solids removal  and resource recovery.
Time Frame 0:0 - 1. 25  Seconds
 
Frame 3 - Carbon Fines
                Voice Over Job Facts
                On this Carbon Fines recovery project one of the smaller Total Clean units was being utilized. This unit is one truck transportable and can be setup in  a couple of hours .  The estimated flow rate on this project was a 1000 GPM , 10% solids  with a recovery of around 25 tons / hour  of an estimated 1.4 Specific gravity solids .  The material was then easily loaded into trucks and hauled away without the worry of the material spilling or dripping on the highway.
   
Time Frame 0.45 Seconds
 
Frame 4 - Harbor Dredging
                Voice Over Job Facts
                This harbor dredging project required two large Total Clean Systems to handle over 5000 gpm from a 14" dredge.  This precision dredging project with material ranging from shell, organics, fine clays and silts to coarse sand, saw varying flow rates in excess of 5000 gpm with percent solids ranging from 6% to as much as 20 %.  The unique process flow of the TOTAL CLEAN handled the varying conditions with no problems,  Other dewatering methods that require the use of polymer require a fairly consistent feed in order for polymer to be metered into the system.  Fluctuating flow rates and percent solids make it almost impossible to do this without a lot of wasted polymer and therefore higher cost.  With the TOTAL CLEAN there is no need for costly polymers and the material can be hauled off immediately rather than waiting days or even weeks for the material to dewater.
 
Time Frame 0.46 - 1.54 Seconds
 
Frame 5 - Sand Removal South Florida 
                Voice Over Job Facts
                 Among the many advantages of the TOTAL CLEAN is its small footprint and quiet operation.  On this south Florida dredging project the unit was set up in a quiet subdivision between a canal and a sidewalk.  While handling 2000 gpm the TOTAL CLEAN quietly removed coral, shell, sand, and silt.  Many residence out for a stroll or a jog found it quite entertaining to stop and watch as the clean white sand rolled off the unit.  DEL offers several different sizes of TOTAL CLEANS, all of which can be customized for a particular job.  Some units are unitized and require only one truck for delivery while our largest unit only requires three trucks and can be set up in a matter of hours.  Most of our systems are wheel mounted and easily transportable.
 
 
Time Frame 1.55 - 3:23 Seconds
 
Frame 6 - Coal Fines - Manchester, KY
                Voice Over Job Facts
                During this Coal Fines Recovery project both a Large Total Clean and Small Total Clean system were utilized in series.  The large system took care of the Coal Fines while the smaller system dewatered the clays.  Over 2200 GPM was dredged through this system along with 500 GPM of fresh water supplied the Spray Bars.  The spray bars are used to wash the clays off of the coal.  Coal Fines as small as 400 Mesh were being recovered and we were still able to maintain 80% dry solids.  In order for us to accomplish these moisture results the coal was conveyed through a  40"  centrifugal dryer.  Without the dryer, we were able to maintain 70% dry solids, a tough task for competitors especially with material as small as 400 Mesh.  This system is completely mobile and can be setup in 1 to 2 days.  Don't waste thousands of dollars or even millions building a washplant up front.  Let DEL move in, take care of the task at hand and move out, economically and efficiently you can't go wrong.
 
Time Frame 3:24 - 4:56 Seconds
 
Frame 7 - Flash Contact Information
                Voice Over Contact Information
                Contact a DEL Representative today at 1-(800) GO - TANKS
Time Frame 4:57 - 5:15 Seconds

Voice Over